Home › Plastic Raw Materials › LLDPE

Polymer Sourcing & Distribution

LLDPE Resin Supplier in Pakistan Virgin LLDPE Resin

Leading supplier and importer of virgin LLDPE resin in Pakistan, coordinating grade-specific sourcing for C4 and C6 film, rotomoulding, injection and masterbatch-related applications against the producer datasheet, approved sample, packing and shipment availability.

PCT classification review3901.1000 / 3901.4000
Physical formNatural pellets / grade powder
DocumentAGE-TD-POLY-LLDPE-005
WhatsApp Requirement →View Grades ↓
Representative natural LLDPE resin pellets, film rolls, industrial packing and unbranded moulded samples
Representative product image · Pellet, powder, additives and packing vary by producer and grade
Indicative originsSaudi ArabiaUAEQatarSouth Korea / other approved originsProducer, grade, origin and seller authority are confirmed in every commercial offer.

Commercial grade families

Choose by comonomer, process and performance.

C4 or C6 designation alone is not a complete specification. Final selection must also match MFR, density, additive package, optics, sealing, mechanical targets, equipment and regulatory requirements.

Regular Sourcing · Grade & Availability

LLDPE Film — Butene C4

Grade family
Conventional C4 film grade
MFR profile
Typically 0.9–2.0 g/10 min

Selected for a practical balance of processability, tensile performance, sealing and impact in general packaging, heavy-duty sacks, industrial liners and agricultural film structures.

Regular Sourcing · Grade & Availability

LLDPE Film — Hexene C6

Grade family
Higher alpha-olefin film grade
MFR profile
Typically 0.8–1.2 g/10 min

Matched where improved puncture, tear, toughness and film-down-gauging performance are required in lamination, liquid pouches, stretch-hood, silage and demanding flexible packaging.

Regular Sourcing · Grade & Availability

LLDPE Rotomoulding

Grade family
Granule / powder tank and part grades
MFR profile
Typically 3.5–7.0 g/10 min

Grades selected for impact, stiffness, surface finish, UV package and method-specific ESCR in domestic or industrial tanks, bins, barriers, playground items and other rotationally moulded parts.

Regular Sourcing · Grade & Availability

LLDPE Injection / Masterbatch

Grade family
High-flow flexible moulding grades
MFR profile
Typically 20–50 g/10 min

High-flow grades evaluated for flexible lids, soft mouldings, carrier-resin or masterbatch use and selected housewares where low-temperature toughness, flexibility and fill behaviour are required.

Producer sourcing: recognized portfolios—including SABIC, Borouge, ExxonMobil, LOTTE Chemical, Qatofin / QAPCO channels and other approved sources—may be evaluated subject to the requested grade and market availability. A producer partnership, allocation, agency or direct authorization is confirmed only through the actual offer and seller evidence.

Indicative screening comparison

Datasheet controls the contract

These bands are for preliminary grade screening only; they are not universal or certified values. The selected producer's current technical datasheet, sample approval, test methods and certificate of analysis control the commercial contract.

SegmentMFR¹Density²Tensile at break³Flexural modulus³ESCR
Film — C4 0.9–2.0 0.918–0.922 30–35 250–350 Method / grade dependent
Film — C6 0.8–1.2 0.918–0.924 35–45 280–380 Method / grade dependent
Rotomoulding 3.5–7.0 0.932–0.939 15–19 600–700 Producer TDS required
Injection / masterbatch 20–50 0.924–0.926 10–14 400–500 Producer TDS required

¹ g/10 min at 190°C/2.16 kg · ² g/cm³ · ³ MPa. Mechanical values change with test method, specimen and film orientation. ESCR hours must never be compared without the same method, reagent, specimen and failure criterion.

Sourcing & logistics

Grade-locked supply for film and moulding converters.

Pakistan's plastics sector uses substantial imported polymer feedstock. A fixed claim of zero local PE production or 100% import dependency should only be made against current official capacity and trade evidence.

Indicative load plan

20 ft FCLApprox. 16.5–17.5 MT
40 ft / HC FCLApprox. 25–26 MT

Final payload depends on palletization, bag dimensions, powder or pellet form, container type and carrier limits.

Packaging & routing

  • Standard: 25 kg producer bags
  • Bulk option: approx. 1,000 kg FIBC where offered
  • Pakistan: Karachi Port or Port Qasim
  • Other markets: buyer-nominated destination port

Commercial basis

CFR or CIF Karachi / Port Qasim, suitable FOB-origin offers and other buyer destinations can be evaluated. Payment may be structured through an irrevocable L/C at sight or mutually approved T/T terms under the signed contract.

LLDPE sourcing desk

Send the grade code—or send the application.

Share the comonomer or producer preference, process, MFR, density, additive package, film or part target, monthly quantity, packing and destination. AGE will review technical fit, seller authority, stock, documentation and shipment terms before issuing an offer.

Email Requirement →

Classification note: Pakistan's FY 2025–26 tariff lists polyethylene having a specific gravity below 0.94 under PCT 3901.1000 and ethylene–alpha-olefin copolymers having a specific gravity below 0.94 under PCT 3901.4000; both are shown with 0% customs duty in that tariff. Because C4/C6 LLDPE is an ethylene–alpha-olefin copolymer, final classification must be confirmed from the actual composition, COA and customs review. Other taxes, regulatory duties, anti-dumping measures, exemptions or SRO conditions may still apply.

References: Pakistan Customs Tariff FY 2025–26 · SABIC LLDPE portfolio · SABIC 2026 PE brochure · Borouge LLDPE film reference · ExxonMobil PE portfolio · LOTTE LLDPE portfolio · QAPCO / Qatofin profile